Best Nvidia Control Panel Settings: FPS & Performance [2023] (2024)

FAQs

What should I set my NVIDIA control panel for best performance? ›

Choose 'Performance' for a higher fps, but set it to 'Quality' for a realistic and even lighting for your games. Choose for 'G-Sync' or 'G-Sync Compatible' if your monitor and video card support this. Select your primary video card here. Turn on when you have enough space on your drive, this will reduce the CPU usage.

Frame rates are capped at 40 or 60 fps, depending on the application. WhisperMode slider: Appears under Program Settings when enabled in GeForce Experience. Move the slider to the left (decrease the maximum frame rate) for quieter gaming, or to the right (increase the maximum frame rate) for higher performance.

For Nvidia, this is the Nvidia Control panel. You can select this as a desktop app or Microsoft store app via the dropdown. Click on the app, click options and select high performance. Repeat for any game where you want maximum performance.

30 FPS: Console and lower-end PCs use 30 FPS as a benchmark, which is 10 FPS above the stuttering rate. This frame rate is great for single-player gaming and enthusiasts that want more of a cinematic experience. 60 FPS: Most gaming PCs use 60 FPS as a benchmark. Less demanding console games can manage 60 FPS.

By submitting the frames just before they're needed in the queue, this mode significantly lowers system latency. As a result, your gameplay will be much smoother, making gaming more enjoyable. Low latency is most impactful with GPU-bound games using frame rates from 60 to 100 FPS.

NVIDIA RTX 30-series cards have a maximum temp of 93C, meaning they can run this hot without throttling speeds or shutting down.

The RTX 3070 delivers 79fps on average, just a single frame per second behind the RTX 2080 Ti, enough for around a 60 per cent lead over the RTX 2070 and more than a 120 per cent advantage against the GTX 1070.

What FPS can RTX 3070 run? ›

A GeForce RTX 3070 card at 1080p is seeing a strong frame rate when running Days Gone on Ultra - 102 FPS. Lets look at the performance its getting on Battlefield 2042 which is 63 FPS. To add a bit more variety lets see how the popular Star Citizen is predicted to perform on this hardware, which gets a strong 115 FPS.

Go to play.geforcenow.com > GeForce NOW Settings menu > Streaming Quality > Custom and set the Frame rate to 120 FPS.

With games, higher frame rates can result in smoother, more natural-looking images. Compare that with low frame rates, where the onscreen action will stutter and pause. Because the graphics processing on all consoles is limited, higher frame rates come at a cost.

24fps is “cinematic smooth, or just smooth enough for it to not look to choppy. 30fps is the bottom line for gaming and is what most videos are shot at. 60 fps is the rate a which an average monitor refreshes, and usually action shots or games on a decent laptop will run at 60 fps.

RAM can improve frame rates and frame pacing when playing games. Check both capacity and speed when choosing RAM. Know the difference between form factors like DIMM and SO-DIMM. Get at least 16GB of RAM to play modern games, and more if you multitask.

Yes, overclocking your GPU will usually improve the performance of your games and media apps. More powerful systems may see less of a benefit from overclocking the graphics card, but if your games typically run at 40 or 50 FPS, an overclock will result in visible improvements.

Overclock Your GPU (and CPU & RAM)

As a last ditch effort for some users who have an older graphics card, or as an option for any game who just wants to get higher framerates, one way that you can increase your FPS is to overclock your system's hardware. You'll first want to try overclocking your GPU.

Does upgrading your CPU increase FPS? ›

The amount of GPU usage also matters. For example, if it's around 80-90%, upgrading your CPU will increase your frame rate, but not by much. By contrast, if your GPU usage is close to 50%, you could potentially double your frame rate by upgrading to a better CPU.

With the current console generations from Sony and Microsoft, 120 frames per second are already possible in some games, and the standard is a stable 60 FPS across all current systems. This frame rate is also possible for many games on high-end smartphones. For PCs, 60 FPS is usually the standard for current devices.

24fps. This frame rate is the one used by most in Hollywood. It makes video content seem more cinematic. While an average person may be unable to tell the difference between this frame rate and a higher one, most professional video makers can.

The general consensus is that 24fps is more “cinematic” or “film-like” while 30fps reminds people of video, or broadcast television. If you're trying to tell a cinematic story, 24FPS is your best bet. For content set in reality, like most vlogs, 30fps is the better choice.

Turn on NVIDIA Reflex - If NVIDIA Reflex is available in your game, we highly recommend turning NVIDIA Reflex Low Latency Mode to On. Simply navigate to the option in your games options menu and turn on the setting. This will ensure your CPU is submitting work to the GPU just in time for it to be rendered.

The RTX 3070 and 3080 were the first two cards to launch from NVIDIA's 30-seires, hitting the market in September 2020. They're very different graphics cards. The RTX 3070 straddles the boundary between the midrange and high-end of the market, while the RTX 3080 is strictly a high-end card.

Generally, a temperature between 90 to 100 degrees celsius is considered to be too hot for a GPU. If it goes more than that, there might be permanent damages to your processor. To help you in this case, we have discussed everything you need to learn about GPU heat and how to control the heat.

80c is warm but is within spec as max temp for the Nvidia RTX 3080 is 93c.

At 4K ultra, the 3070 averages 68 fps across our nine-game suite. That's good, but four of the games are below 60 fps, while two of the games run at more than 100 fps, somewhat skewing the results. 4K60 is within reach of the 3070, just not at maxed-out settings in all games.

4K testing

I've been testing the RTX 3070 with Acer's 27-inch Nitro XV273K, a 4K monitor that offers up to 144Hz refresh rates, G-Sync, and even HDR support. It's more of a 50 / 50 split on how many games hit 60fps or more on the RTX 3070 with maxed-out settings at 4K.

How much FPS can a 3070 run on warzone in 1440p? ›

During our testing we found the RTX 3070 to be hitting an average of almost 120FPS (118) at 1440P Ultra pre-set with DLSS set to quality. Tune down these settings slightly and 4K gameplay at 60FPS or even 100FPS plus, becomes all that more possible!

At 1440p, the 3080 doesn't give you that much of a performance boost to warrant the significant price difference. The 3070 will give you an excellent QHD experience. It is the better card for most people, especially if you don't want to take a dig at 4K gaming.

In 1080p, even mid-range cards like an RTX 3060 can easily get it done, while an RTX 3070 can do the same for 240Hz in 1440p. This applies to major competitive titles like Fortnite, Apex Legends, Rocket League, PUBG, Overwatch 2 and many others.

The 3060 delivers a cinematic 33fps at 4K, but things look a lot better at 1440p (54fps) and 1080p (68fps). Focusing on 1080p, we're getting around 72 per cent the performance on an RTX 3060 Ti at 82.5 per cent of the cost; not a great trade-off unfortunately.

Using VSync while playing games is a fantastic setting as long as it works as planned. It prevents screen tearing, thus enhancing your gaming experience. It also prevents your GPU from overworking itself while rendering frames responsible for tearing the game.

Under the “preferred graphics processor” drop down, you will see 2 options… Assuming you're using a laptop, integrated Graphics processor provides lower performance and longer battery life. Nvidia Graphics Processor provides higher performance with shorter battery life when you're running your device on battery power.

In this guide, we'll share the perfect settings for your NVIDIA Control panel that increases your FPS, reduces input lag, improves the visual quality, and unlocks the true potential of your NVIDIA Graphics card.

PhysX uses both the CPU and GPU, but generally the most computationally intensive operations are done on the GPU.

By itself, VSync has no bearing on graphical quality, but enabling it eliminates ugly screen tearing. While that may seem like a no-brainer, it can also tank your frame rate and increase input lag—both of which are the bane of competitive gaming.

You should turn off your g-sync if your monitor or pc does not have a high-end GPU.

Should I use G Sync and VSync? ›

Having both enabled would eliminate the tearing at those high framerates at the cost of input lag. You could also try a framerate limiter to avoid the tearing. and set the Preferred Refresh Rate. Within your monitor's on-screen menu settings, ensure GSync and or proper refresh rate is enabled.

If you have a decent CPU with integrated graphics, you can even expect to get over 60 FPS in the game.

Click the "Program Settings" tab. On the "Global Settings tab," locate and select the "Preferred graphics processor" option. From the list, select "High-performance Nvidia Processor." Click Apply.

In general, unless you need intensive graphics processing, it's a better idea to go with an upgraded CPU. As you'll read later, GPUs tend to be more expensive than last for a shorter time. Sticking with the simpler option of upgrading the CPU will improve your system's speed without costing you too much.

FPS is influenced by the CPU, although only to a limited extent. To keep up with the GPU and give it data, you'll need a strong CPU with enough headroom. Don't do anything more than that to get the best value for your money. Here, we'll go over all you need to know about the CPU's importance in PC gaming.

Nvidia PhysX can be described simply as one of the most powerful physics engines that can be currently found in games. Thanks to the PhysX, game developers are able to create games with real-time physics which, if used properly allows to create effects which perfectly emulate the real world physics.

If you're unsure, you can always stick to the auto setting but it is generally a good idea to set it to use the GPU instead of the CPU. You should do this regardless of how fast/new your CPU is.

Auto-select (recommended): This option lets the NVIDIA driver select the best processor for PhysX. <specific GPU>: This option causes the GPU to be used to accelerate PhysX processing. If the system has more than one PhysX-capable GPU, then you can select which GPU to use for PhysX GPU acceleration.